Portal Home > Knowledgebase > How to > LTE Modem Connection


LTE Modem Connection




The following information applies to you only when directed by LiteWire staff. If you were not sent to this page, these instructions do not apply to your setup.

You have been given a device ("LiteWire hAP") to connect inside your home. The device is required for internet access so until it is connected correctly your internet service will not function.

Instructions:
     1) Connect the wire from outside to Port #1, labeled "Antenna" and/or "Internet", on the LiteWire hAP.
     2) Connect the wire from your router's "Internet" port to one of the numbered ports on the LiteWire hAP. (Cable not shown in image below)
     3) Connect power to the LiteWire hAP
     4) Confirm all connections per the photo below.



Was this answer helpful?

Add to Favourites Add to Favourites    Print this Article Print this Article

Also Read

Powered by WHMCompleteSolution